Num axes Camera SL1008
The SL1008 trail camera can be used for hunting or wildlife observation, but it can also be used as an alternative to surveillance cameras in warehouses or houses.
The wildlife is less disrupted and the game less scared by the discreet and quiet trail camera than by human presence.
Trail camera features:
Invisible black leds
PIR detection distance: up to 60 feet (20 meters)
PIR detection angle: 48 degrees
Infrared flash range: up to 30 feet (10 meters)
IR flash auto activated in low light conditions
Image sensor: 5 Mega Pixel CMOS
Still images: from 1 to 10 images per trigger
Videos with audio recording: programmable length from 5 seconds to 10 minutes
Image resolution: 3 MP, 5 MP or 12 MP
Video resolution: VGA 640 x 480 p, HD 1280 x 720 p
PIR detection mode: the camera will take photos or videos when it is triggered by the PIR sensor’s detection of activity in the area it covers
Time Lapse mode: the camera will take photos automatically at your choice of intervals during one block of time you set up
Built-in laser beam for coverage testing
Date, time, temperature (in °C) and moon phase imprint on the photos and videos
External memory support: SD memory card up to 32 GB (not supplied)
Reliable and efficient:
Weather resistant (IP66)
Trigger speed: less than 1 second
Trail camera specifications:
Dimensions: 130 x 50 x 130 mm
Power: AA LR06 size batteries x 8 (not supplied)
External power port
Black and white LCD screen
Built-in TV out port (NTSC/PAL) to connect the camera to a TV monitor to play the captured images/videos
Built-in USB port for images/videos download
1 trail camera model SL1008
1 USB cable
1 nylon mounting strap
1 user’s guide
Listed below are some useful pointers on how to use your trail camera to get the best results:
Mount the camera about 1.5~2 m (5~6 ft) high with the camera pointed at a slight downward angle.
Mount the trail camera facing north or south not east or west as the rising ans setting of the sun could produce false triggers and overexposed images.
If you’re covering a trail, face the camera down or up the trail.
Clear out any brush or weeds in front of the trail camera. These can cause false triggers due to temperature and motions disturbances in front of the camera (especially on windy days).